YUV color formats

Planar:

I420(IYUV) = YUV420P

YYYY
YYYY
UU
VV

YV12=YVU420P
YYYY
YYYY
VV
UU

Semi Planar

NV12=YUV420SP

YYYY
YYYY
UVUV

NV21=YVU420SP

YYYY
YYYY
VUVU

2014/06 結算日 9250Call

0.2 -> 56 = 28000%

Remote Desktop Service install failed on Windows Server 2012 R2 domain controller

While checking event log, I found “Windows Internal Database" service start failed due to logon failure. This service is required for Remote Desktop Connection Broker.
Then I found this article: “MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012

After modifying Default Domain Controller Policy, Remote Desktop Service now install successfully.

HP DL380 G5 running Windows Server 2012 R2

Drivers for 2 unknown devices in device manager:
HP iLO Management Channel Interface Driver (cp019292.exe)
HP ProLiant iLO 2 Management Controller Driver (cp019291.exe)

Other updates:
HP Service Pack for ProLiant (SPP)

P400 warning shown in HP Smart Storage Administrator:
Max Dirty Cache Lines Not Flushed Reached – Warning

Microsoft Network Monitor has been replaced by Microsoft Message Analyzer

原來Microsoft Network Monitor已經被Microsoft Message Analyzer取代了

Enable CTCP in Windows 8.1 & Windows Server 2012 R2

Using Windows PowerShell:
Set-NetTCPSetting -SettingName InternetCustom -CongestionProvider CTCP

To verify:
Get-NetTCPSetting

Windows Update error 0x80070490 on Server 2008

Reference: How to overcome error 0x80070490 when installing updates in Windows Vista/Server 2008

問題是出在CBS(Component Based Servicing)
用sfc /scannow檢查會一直出現錯誤，重開機後也沒被修復
在C:\Windows\Logs\CBS\CBS.log中可以看到有一些
“Error                 CBS    Failed to resolve Package: Package_for_KB"

解決方法要是把"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing"裡面所有KBxxxxxx相關的項目全部移除
要能移除還必須先取得擁有權、設定權限，刪完之後再把權限和擁有者改回去。
移除重開機後即可順利安裝更新。

Lancool PC-K7 upgrade to USB 3.0 panel

http://www.lian-li.com/tw/faq/lian-li-usb3-0-20pin-cables-list/

PC-K7機殼可以選用PW-IN11AV65T0 (USB 3.0 x1 + USB 2.0 x2)或是PW-IN20AV65T0 (USB 3.0 x2)

20120604

有個倒楣鬼，莫名其妙多賠兩萬五

Windows 7/Vista converting SATA from IDE-Compatible to AHCI 萬用轉換法

Error message when you start a Windows 7 or Windows Vista-based computer after you change the SATA mode of the boot drive: “STOP 0x0000007B INACCESSABLE_BOOT_DEVICE"

1. reg add HKLM\SYSTEM\CurrentControlSet\services\msahci /v Start /t REG_DWORD /d 0 /f
2. reg add HKLM\SYSTEM\CurrentControlSet\services\iaStor /v Start /t REG_DWORD /d 0 /f
3. Reboot then enable AHCI in BIOS. Save and exit then reboot.
4. Reboot again then install AHCI driver such as Intel Rapid Storage Technology